Ceramicspeed PF4630 Bottom Bracket (Red Coated)

• This Bottom Bracket is when you have a PF30, BBright, or 386EVO shell frame and want to install a BB30 crankset into the frame.
• All have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm.
• The crank has a 30mm diameter spindle.This bottom bracket

• nearly zero loss of power due to friction, thanks to the bearings.
• The bearings have super round, super smooth CeramicSpeed balls rolling on hardened-steel races.
• The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag.
• They come installed in cups.
• Features Technical Data 30mm thru-axle cranks are increasingly popular due to their high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames.
• Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system.The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races.
• Thanks to CeramicSpeed, it’s also nearly zero drag.
• Standard Bearings typically have a frictional drag of 0.3-0.4 watts per set.
• That’s in the range of a 75% drag reduction versus conventional bb’s.
• The bearings last at least 3x longer than other bearings.Change the grease for your rides.
• Race Day Grease, All Round, and Long Life are greased CS designed.
• The first is the least drag, the last is the most durable.
• All Round, in the middle, comes in road bearings.
• Coated Our coated products are covered by a lifetime warranty.
• The unique coating formula is a metallic layer that covers the bearing races and makes them 75% harder than steel.
• Thanks to this, they are highly resistant to corrosion and the coating provides even lower friction than our standard bearings.
• Even if the bearing is contaminated with degreaser, water, or mud, the risk of bearing failure due to corrosion is negligible if you choose the coated version.
• O-ring support If you need instructions on a crank setup with no crank-based preload adjustment using an O-ring, then follow this link.
• In The Box 2 cups with bearings installed. 2 1mm spacers. 2 0.5mm spacers. 2 dust covers.
• O-ring.
• Spacer tube.
• CeramicSpeed All-Round Grease.
• Sticker sheet.

Type PressFit Bearing Type Ceramic Length  - Shell Width 79-92 mm Thread type  - Spindle Diameter 30 mm

• Country of Origin: Taiwan
• Imported By: Ensign Sports , 502 , Hill Glade , Opp. HDFC Bank Pali Road , Bandra , Mumbai - 400050 , Maharashtra , India. (MH-27)
• Net Quantity: 1N
• Customer Care Address: 291, 10 Main, 5 Block, Jayanagar, Bangalore - 560041.
• Ph: (080)47183232,
• Email: support@bumsonthesaddle.com
• Commodity: Bottom Brackets